Home / Rescreening

Rescreening in Port St. Lucie

New screen on the frame you already have. It is the usual fix for torn, sagging, faded or brittle screens, and it costs far less than a new enclosure.

  • Lanais, patios, porches and pool cages
  • Full rescreens or just the damaged panels
  • Standard, no-see-um, pet-resistant and privacy mesh
Close view of fresh screen mesh being rolled into an aluminum frame

Signs it is time to rescreen

  • Panels that are torn, punctured or pulling out of the frame
  • Mesh that looks chalky or gray, or cracks when you press it
  • Screens that bow in or flap in the wind because the spline has shrunk
  • Bugs getting in through gaps at the edges
  • Several panels lost after a storm

What a rescreen includes

The old mesh and spline come out, each panel is cleaned, and new mesh is rolled in with new spline. A careful job leaves the screen tight and straight with no wrinkles at the corners. Many contractors also replace worn door closers, kick plate screws and the rubber at the base while they are there. Ask what is included, and whether they haul the old screen away.

If any of the frame is bent or loose, it should be fixed before the new screen goes in, because new mesh on a moving frame will not stay tight.

Choosing the mesh

  • Standard fiberglass (18x14): the common choice. Good airflow and a clear view.
  • Small-insect or no-see-um (20x20): a tighter weave that keeps out the tiny biting midges common near water. It cuts airflow a little.
  • Pet-resistant: a heavier vinyl-coated mesh that stands up to claws, often used on the lower panels only.
  • Privacy and solar screens: denser weaves that block sun and the view in from neighbors, useful on west-facing lanais.

A note on salt air

Near the coast, in Jensen Beach, on Hutchinson Island and along the Indian River, salt air corrodes plain steel screws and fasteners. Ask whether the contractor uses stainless or coated fasteners on your job.

Before you sign with anyone

  • Check the license. Aluminum screen enclosures in Florida are built by licensed contractors. You can look a contractor up on the state DBPR license search, and your county may keep its own list.
  • Ask about the permit. New enclosures and structural repairs usually need a building permit, and the contractor normally pulls it. Simple rescreening often does not. Ask which applies to your job.
  • Get the mesh in writing. The quote should name the mesh (standard, small-insect, pet-resistant or privacy), the number of panels and what happens to the old screen.
  • Ask what the warranty covers. Workmanship and materials are often warranted separately, and storm damage usually is not.

How it works

  1. Tell us about the job

    Pick the kind of work and the area, and leave a phone number. It takes about a minute.

  2. One contractor gets it

    We pass your request to one screen contractor who works in your area. Not a list of five, and not a call center.

  3. They call to set up an estimate

    The contractor looks at the job, measures and quotes. You decide whether to go ahead, and you deal with them directly.

Questions about rescreening

Do I need a permit to rescreen?

Often not, when only the mesh is replaced. Structural repairs to the frame are different. The contractor will know what your city or county requires.

Can I rescreen only some panels?

Yes. New panels can look brighter than the old ones next to them for a while, so some people do a whole wall at a time.

How long does a rescreen last?

It depends on the mesh, the sun and the weather. The contractor can tell you what to expect for the mesh you choose.

Guides

Rescreen or replace your screen enclosure?

Torn screen or a failing frame? A short walk-around tells you whether your Port St. Lucie screen enclosure needs a rescreen or real frame work.

Read the guide

Torn, sagging or faded screens?

Send one request and a local screen contractor calls you back.

Get a quote