Home / Guides / Rescreen or replace your screen enclosure?

Rescreen or replace your screen enclosure?

Most of the time the screen wears out before the frame does. A few checks tell you which one needs work before anyone quotes the job.

Published

A torn, sagging screen panel on a pool enclosure in late-afternoon light

Start with the frame, not the screen

Sun, pets, branches and storms tear and fade screen. The aluminum frame that holds it is built to stay. So the real question is whether the frame is still straight, solid and well fastened. If it is, rescreening, which replaces the screen and the rubber spline that holds it in its channel, is the job.

A walk-around you can do yourself

  • Beams: sight along each one from one end. It should run straight. A bow, a kink or a twist is a frame problem.
  • Uprights: push gently. A little give is normal. A wobble, or a creak at a joint, is not.
  • Joints and fasteners: look where beams meet and where the frame meets the house and the deck. Loose, missing or rusted screws and opened gaps all count.
  • Corrosion: white powder or pitting on the aluminum, or rust stains around screws.
  • The base: cracked concrete or a lifted base plate can pull the frame out of line.
  • The roof panels: a roof that sags or holds debris puts weight on the frame.
  • The door: a door that drags or won't latch can mean the frame around it has shifted.

If all of that looks fine, the frame is likely sound and you need screen, not steel.

Signs you need a rescreen

  • Tears, holes or panels that have popped out of their channel
  • Screen that has faded, gone brittle or sags
  • Spline that has shrunk or pulled loose
  • You want a different mesh, such as finer no-see-um mesh or pet-resistant screen on the lower panels

You can rescreen one panel, one wall or the whole enclosure. New screen can look brighter than the faded panels beside it, so ask whether a wall or the whole cage makes more sense.

Signs the frame needs work

  • Bent, buckled or twisted beams
  • Joints that have separated, or fasteners missing or rusted through
  • Heavy corrosion on the aluminum
  • A frame that moves when you push it, or leans
  • Damage from a storm or a fallen limb

Frame damage doesn't always mean a new enclosure. A contractor can often replace a few damaged beams and then rescreen. When much of the frame is bent or corroded, a new screen enclosure is the conversation to have.

Questions to ask when you get quotes

  • Is the frame sound, and if not, which parts need work?
  • Is this a full rescreen or only some panels?
  • Which mesh is included, and what are the other choices?
  • Will worn spline and screws be replaced while the crew is there?
  • Does the job need a permit or HOA approval? Frame work and new enclosures may, so check with the City of Port St. Lucie or St. Lucie County and your HOA before work starts.

Get a quote

Tell us what you see: torn panels, a bent beam, or both. We pass your request to a local screen contractor who can look at the frame in person and quote the work. Requesting a quote is free.

Questions people ask

Can I rescreen just one panel?

Yes. One torn panel can be rescreened on its own, though new screen may look brighter than the panels beside it.

Does a bent beam mean a new enclosure?

Not always. A few beams can often be replaced and the enclosure rescreened. Widespread damage or corrosion is when replacement comes up.

Is rescreening the smaller job?

It reuses the frame, so it usually is. When the frame is in doubt, ask for a quote on both.

Rescreening

Torn, sagging or faded screens?

Send one request and a local screen contractor calls you back.

Get a quote